Gasketing of Series 5500

LETBOND® Anaerobic flange sealant are best suited for small gap applications and rigid metal- to-metal assemblies. It provides a tough, resilient solvent and temperature resistance. No shrink and vaporize.

Directions For Use：

For best performance, bond surfaces should be clean and free from grease.
Apply manually as a continuous bead or by screen printing to one surface of the flanges.
Low pressures may be used when testing to confirm a complete seal after assembly and before curing.

Anaerobic adhesive	5510
High viscosity, high temperature resistance up to 200℃

Anaerobic adhesive	5515
General purpose, high viscosity, excellent flexibility . Max gap fill is up to 0.25mm

Anaerobic adhesive	5518
General purpose, resistant to fluid, specially Suitable for the aluminium surface. Solvent resistant.

Anaerobic adhesive	5574
General purpose, temperature range to 150℃.

PROPERTIES CHART---GASKETING OF SERIES 5500

Product	Item No.	Container	Typical properties	Viscosity (cp)	Gap Fill (mm)	Cure speed hr)	Tensile Strength (kfg/cm²)	Sheer Strength (kfg/cm²)	Temperature Range(℃)
5510	551005 551031	50ml 310ml	Red ,high Temperature Resistant	Paste	0.4mm	24hr	80	120	-55~+200℃
5515	551505 551531	50ml 310ml	Purple, high Viscosity Flexible Good gap fill	Paste	0.5mm	12hr	80	125	-55~+150℃
5518	551805 551831	50ml 310ml	Pink, no Activation Solvent resistant	Paste	0.5mm	12hr	80	125	-55~+150℃
5574	557405 557431	50ml 310ml	Orange General Purpose	＞50000	0.5mm	24hr	80	100	-55~+150℃